yalek
New Member
Posts: 6
|
Post by yalek on Oct 11, 2016 8:17:20 GMT
Helloo, I've been playing around some with laser and ferrocell. When i directed my aim at a copper plate i got this nice arch of light, and as we know we can get a similar effect from a ferrocell. Than decided to put them together and got nice reflection of it which looks like a bright star. the steeper angle we go, the "brighter" the star is. (only made a video since it's to hard to make a steady picture with out laser holding equipments xD) With the ferrocell lying on the copper plate: With the ferrocell above the copper plate(the ferrocell inside the cell holding device): All i have used is a laser, a copper plate and a ferrocell. First the laser directly at the copper plate which gave the arch of light, than i put a ferrocell on the copper which gave the star, than we had to lift the ferrocell above the copper to make the star more bright. Yalek
|
|
|
Post by Timm on Oct 12, 2016 0:15:20 GMT
What happens if you put a large magnet under the copper sheet and shine the laser beam on it?
|
|
yalek
New Member
Posts: 6
|
Post by yalek on Oct 14, 2016 9:21:21 GMT
What happens if you put a large magnet under the copper sheet and shine the laser beam on it? Hello, First off i'd like to show the items used and how i set them up(should have been in the first post). (the ferrocell is on top) And as for what happens is the image itself is easier to apply by directing the beam trough the side of the cell to the middle of the "pole". With the magnet underneath we can get 2 crosses Full imageAnd we can get a hyperbola full image (left) full image(right)While doing this, i noticed some nice ferrocell images full image(left) full image(right) And 2 other pictures i just liked which i got Full image(left) Full image(right)
Yalek
|
|