tpmay
New Member
Posts: 4
|
Post by tpmay on Jun 18, 2019 2:37:46 GMT
Hello, I've purchase the 62mm X 2mm borosilicate flats, E6000, and the formula 509 ferrofluid. I received the package on June 17 and when I opened the package most of the items were fine except for the ferrofluid. Not sure if this is normal or something went wrong, also I never received any vinyl gloves.
|
|
tpmay
New Member
Posts: 4
|
Post by tpmay on Jun 18, 2019 2:40:19 GMT
I don't know if I could still use the ferrofluid or not, need to wipe it off with something. Is Clorox wipes good enough to clean the vial off?
|
|
tpmay
New Member
Posts: 4
|
Post by tpmay on Jun 21, 2019 1:04:01 GMT
Alright, I've looked at the vial of ferrofluid and it looks like it's sealed with some kind of aluminium tape on the cap and I think I can still use this. I tried putting the eye dropper on top of the vial, but I realized it wasn't going to fit so I put the dropper back in the bag.
|
|
tpmay
New Member
Posts: 4
|
Post by tpmay on Jun 21, 2019 1:27:47 GMT
Going to buy some UV curing adhesive cause I failed to look up what if E6000 has some issues with fumes, also this is my first time buying from Ferrocell USA.
|
|
|
Post by Timm on Jun 24, 2019 10:58:24 GMT
Hello, I've purchase the 62mm X 2mm borosilicate flats, E6000, and the formula 509 ferrofluid. I received the package on June 17 and when I opened the package most of the items were fine except for the ferrofluid. Not sure if this is normal or something went wrong, also I never received any vinyl gloves. Not normal. Please send me an email at info@ferrocell.us describe problem again and I will remedy your problem ASAP. View Attachment
|
|